The recommended layout for the TPS3707-33DGNG4 involves placing the device close to the power source, using short and wide traces for the power lines, and keeping the sense lines away from the power lines to minimize noise. Additionally, a 10nF capacitor should be placed between the VREF and GND pins to filter out noise.
The output voltage of the TPS3707-33DGNG4 is fixed at 3.3V and does not require any external resistors or calculations.
The maximum input voltage that the TPS3707-33DGNG4 can handle is 15V. Exceeding this voltage may damage the device.
The TPS3707-33DGNG4 is rated for operation up to 125°C. However, the device's performance and reliability may degrade at high temperatures. It is recommended to derate the device's output current and voltage according to the temperature derating curve in the datasheet.
To troubleshoot issues with the TPS3707-33DGNG4, check the input voltage, output voltage, and output current. Ensure that the device is properly soldered and that there are no shorts or opens on the board. Also, check the thermal performance of the device and ensure that it is not overheating.
TPS3707-33DGNG4 datasheet
by Texas Instruments
