TPS2592AADRCT datasheet by Texas Instruments

TPS2592AADRCT Frequently Asked Questions (FAQs)

• What is the maximum input voltage that the TPS2592AADRCT can handle?
  The TPS2592AADRCT can handle input voltages up to 28V, but it's recommended to keep the input voltage below 24V for optimal performance and reliability.
• How do I choose the right output capacitor for the TPS2592AADRCT?
  The output capacitor should be chosen based on the output voltage and current requirements. A minimum of 10uF ceramic capacitor with an ESR of 10mΩ or less is recommended. Larger capacitors can be used for improved output stability and transient response.
• What is the purpose of the EN pin on the TPS2592AADRCT?
  The EN (enable) pin is used to turn the regulator on or off. When the EN pin is high, the regulator is enabled, and when it's low, the regulator is disabled. This pin can be used to implement power sequencing or to turn off the regulator when not in use.
• How do I calculate the output voltage of the TPS2592AADRCT?
  The output voltage of the TPS2592AADRCT is set using the FB (feedback) pin and the resistive divider network. The output voltage can be calculated using the formula: Vout = 0.8V x (R1 + R2) / R2, where R1 and R2 are the resistors in the divider network.
• What is the thermal shutdown temperature of the TPS2592AADRCT?
  The TPS2592AADRCT has a thermal shutdown feature that turns off the regulator when the junction temperature exceeds 150°C. This feature helps prevent damage to the device due to overheating.