TPS2071DAP datasheet by Texas Instruments

TPS2071DAP Frequently Asked Questions (FAQs)

• What is the maximum current that the TPS2071DAP can handle?
  The TPS2071DAP can handle a maximum current of 1A per channel, with a total current limit of 2A for both channels combined.
• How do I ensure that the TPS2071DAP is properly powered?
  The TPS2071DAP requires a power supply voltage between 2.7V and 5.5V, and it's recommended to use a decoupling capacitor of at least 1uF between the VIN pin and GND to ensure stable operation.
• What is the purpose of the EN pin on the TPS2071DAP?
  The EN (enable) pin is used to enable or disable the device. When the EN pin is high, the device is enabled, and when it's low, the device is disabled and all outputs are turned off.
• How do I configure the TPS2071DAP for a specific voltage output?
  The TPS2071DAP has a fixed output voltage of 3.3V, but you can use external resistors to adjust the output voltage. The datasheet provides a formula to calculate the required resistor values for a specific output voltage.
• What is the thermal shutdown temperature of the TPS2071DAP?
  The TPS2071DAP has a thermal shutdown temperature of 150°C, which means that the device will shut down if the junction temperature exceeds this value to prevent damage.