TPS2052DR datasheet by Texas Instruments

TPS2052DR Frequently Asked Questions (FAQs)

• What is the maximum current rating of the TPS2052DR?
  The maximum current rating of the TPS2052DR is 2A per channel, with a total current limit of 4A for both channels combined.
• How do I ensure safe operation of the TPS2052DR in high-temperature environments?
  To ensure safe operation, ensure that the device is operated within the recommended operating temperature range of -40°C to 85°C, and that the thermal pad is properly connected to a heat sink or ground plane to dissipate heat.
• What is the purpose of the EN (enable) pin on the TPS2052DR?
  The EN pin is used to enable or disable the output of the TPS2052DR. When the EN pin is high, the output is enabled, and when it is low, the output is disabled.
• How do I configure the TPS2052DR for active-high or active-low enable?
  The TPS2052DR can be configured for active-high or active-low enable by connecting the EN pin to a logic high or logic low signal, respectively.
• What is the minimum input voltage required for the TPS2052DR to operate?
  The minimum input voltage required for the TPS2052DR to operate is 2.7V, although it is recommended to operate the device with an input voltage of at least 3.0V for optimal performance.