Please enter a valid full or partial manufacturer part number with a minimum of 3 letters or numbers

    Part Img TPS2041AD datasheet by Texas Instruments

    • 0.7A, 2.7-5.5V Single Hi-Side MOSFET, Fault Report, Act-Low Enable 8-SOIC 0 to 85
    • Original
    • Yes
    • Yes
    • Active
    • EAR99
    • 8542.39.00.01
    • 8542.39.00.00
    • Powered by Findchips Logo Findchips
    • Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.

    TPS2041AD datasheet preview

    TPS2041AD Frequently Asked Questions (FAQs)

    • The maximum current rating of the TPS2041AD is 2A per channel, with a total current limit of 4A for both channels combined.
    • To ensure proper thermal management, it is recommended to provide a heat sink or thermal pad to the exposed thermal pad on the bottom of the package, and to keep the ambient temperature below 85°C.
    • The EN (enable) pin is used to enable or disable the output of the TPS2041AD. When EN is high, the output is enabled, and when EN is low, the output is disabled.
    • The output voltage of the TPS2041AD can be configured by connecting resistors between the FB (feedback) pin and the output pin, and between the FB pin and ground. The ratio of these resistors determines the output voltage.
    • The minimum input voltage required for the TPS2041AD is 2.7V, but it is recommended to use an input voltage of at least 3.5V for optimal performance.
    Supplyframe Tracking Pixel