The recommended power-on sequence is to apply VDD (1.8V) first, followed by VDDA (1.8V) and then VDDIO (3.3V). This ensures proper power-up of the device.
The EMIF can be configured using the EMIF control registers. The device supports asynchronous and synchronous modes, and the configuration depends on the type of memory used (e.g., SDRAM, Flash, etc.). Refer to the device's user guide for detailed configuration information.
The maximum clock frequency supported by the TMS320VC5416PGE160 is 160 MHz. However, the actual clock frequency used depends on the specific application and the clock domain configuration.
The TMS320VC5416PGE160 has a built-in watchdog timer module. To implement a watchdog timer, configure the watchdog timer registers to set the timeout period and enable the timer. The watchdog timer can be reset using a software reset or a hardware reset.
The ECC feature is used to detect and correct single-bit errors in the device's memory. It is particularly useful in applications where data integrity is critical, such as in automotive or industrial control systems.
TMS320VC5416PGE160 datasheet
by Texas Instruments
