TMS320F2812PGFS datasheet by Texas Instruments

TMS320F2812PGFS Frequently Asked Questions (FAQs)

• What is the maximum clock frequency that can be used with the internal oscillator?
  The maximum clock frequency that can be used with the internal oscillator is 150 MHz.
• How do I configure the boot mode of the TMS320F2812PGFS?
  The boot mode of the TMS320F2812PGFS can be configured using the BOOTMODE pins. The BOOTMODE pins are sampled during reset to determine the boot mode. The boot mode can be set to either flash, OTP, or external memory.
• What is the purpose of the EMIF (External Memory Interface) in the TMS320F2812PGFS?
  The EMIF (External Memory Interface) in the TMS320F2812PGFS is used to interface with external memory devices such as flash, SRAM, and SDRAM. It provides a 16-bit or 32-bit data bus and supports asynchronous and synchronous memory interfaces.
• How do I use the ePWM (Enhanced Pulse Width Modulator) module in the TMS320F2812PGFS?
  The ePWM module in the TMS320F2812PGFS is used to generate PWM signals for motor control, power conversion, and other applications. It can be configured using the ePWM registers and can generate up to 6 PWM signals.
• What is the purpose of the SCI (Serial Communication Interface) module in the TMS320F2812PGFS?
  The SCI module in the TMS320F2812PGFS is used for asynchronous serial communication with other devices. It supports baud rates up to 3.125 Mbps and has a 16-character FIFO buffer.