TMS320F28031PNS datasheet by Texas Instruments

TMS320F28031PNS Frequently Asked Questions (FAQs)

• What is the maximum clock frequency of the TMS320F28031PNS?
  The maximum clock frequency of the TMS320F28031PNS is 60 MHz.
• How do I configure the boot mode of the TMS320F28031PNS?
  The boot mode of the TMS320F28031PNS can be configured using the BOOTMODE pins. The BOOTMODE pins are sampled during reset to determine the boot mode. The boot mode can be set to either flash, OTP, or SCI.
• What is the purpose of the XINTF pin on the TMS320F28031PNS?
  The XINTF pin is an external interrupt pin that can be used to trigger an interrupt in the microcontroller. It can be configured as an edge-triggered or level-triggered interrupt.
• How do I use the ePWM module on the TMS320F28031PNS?
  The ePWM module on the TMS320F28031PNS can be used to generate PWM signals. The module consists of a timer, a counter, and a comparator. The timer generates a clock signal, the counter counts the clock signal, and the comparator compares the counter value with a set value to generate the PWM signal.
• What is the maximum amount of flash memory available on the TMS320F28031PNS?
  The TMS320F28031PNS has 128 KB of flash memory.