TMS320C6711BGFN150 datasheet by Texas Instruments

TMS320C6711BGFN150 Frequently Asked Questions (FAQs)

• What is the recommended clock frequency for the TMS320C6711BGFN150?
  The recommended clock frequency for the TMS320C6711BGFN150 is 150 MHz, but it can operate at frequencies up to 167 MHz with reduced voltage and temperature ranges.
• How do I configure the External Memory Interface (EMIF) for SDRAM?
  The EMIF can be configured for SDRAM by setting the EMIF control registers (EMCR) to select the SDRAM mode, and then configuring the SDRAM timing parameters using the SDRAM control registers (SDCR). Refer to the TMS320C6711BGFN150 TRM (Technical Reference Manual) for detailed configuration steps.
• Can I use the TMS320C6711BGFN150 with a 3.3V power supply?
  No, the TMS320C6711BGFN150 requires a 1.2V to 1.4V power supply for the core voltage (CVDD) and 3.3V for the I/O voltage (DVDD). Using a 3.3V power supply for the core voltage can damage the device.
• How do I implement a watchdog timer on the TMS320C6711BGFN150?
  The TMS320C6711BGFN150 has a built-in watchdog timer that can be enabled and configured using the Watchdog Timer Control Register (WDCR). The watchdog timer can be used to reset the device in case of a software fault or hang.
• Can I use the TMS320C6711BGFN150 for real-time operating system (RTOS) applications?
  Yes, the TMS320C6711BGFN150 is suitable for RTOS applications due to its high-performance processing capabilities, low latency, and interrupt handling features. However, the choice of RTOS depends on the specific application requirements and compatibility with the device.