TMS320C5535AZHH05 datasheet by Texas Instruments

TMS320C5535AZHH05 Frequently Asked Questions (FAQs)

• What is the recommended power-on sequence for the TMS320C5535AZHH05?
  The recommended power-on sequence is to apply VDD first, followed by VDDA, and then the clock signal. This ensures proper initialization of the device.
• How do I configure the internal oscillator on the TMS320C5535AZHH05?
  The internal oscillator can be configured using the OSCCR register. The oscillator frequency can be set to 12 MHz, 24 MHz, or 48 MHz by writing the appropriate values to the OSCCR register.
• What is the maximum clock frequency that can be used with the TMS320C5535AZHH05?
  The maximum clock frequency that can be used with the TMS320C5535AZHH05 is 100 MHz. However, the device can operate at frequencies up to 120 MHz with reduced voltage and temperature ranges.
• How do I use the DMA controller on the TMS320C5535AZHH05?
  The DMA controller can be used to transfer data between peripherals and memory. The DMA controller is configured using the DMA registers, and the transfer is initiated by setting the DMA enable bit in the DMA control register.
• What is the purpose of the EMIF on the TMS320C5535AZHH05?
  The EMIF (External Memory Interface) is used to interface with external memory devices such as SDRAM, SRAM, and flash. The EMIF provides a 16-bit or 32-bit data bus and supports various memory types and configurations.