TMP103HYFFT datasheet by Texas Instruments

TMP103HYFFT Frequently Asked Questions (FAQs)

• What is the maximum operating temperature range for the TMP103HYFFT?
  The TMP103HYFFT can operate from -40°C to 125°C, but the accuracy specifications are only guaranteed from -20°C to 100°C.
• How do I handle the TMP103HYFFT's power-on reset (POR) behavior?
  The TMP103HYFFT has a built-in POR circuit that resets the device when the supply voltage (VCC) falls below 1.5V. To ensure proper operation, ensure that VCC rises monotonically during power-up and avoid drooping or oscillations.
• What is the recommended layout and routing for the TMP103HYFFT's digital output pins?
  To minimize noise and ensure reliable operation, keep the digital output pins (SDA, SCL, and INT) short and away from high-frequency signals. Use a dedicated ground plane and avoid routing digital signals near the temperature sensor pins.
• How do I calibrate the TMP103HYFFT for optimal accuracy?
  The TMP103HYFFT does not require calibration, as it is factory-calibrated. However, to achieve optimal accuracy, ensure that the device is operated within the specified temperature range and that the thermal interface between the device and the target is well-designed.
• What is the maximum allowable capacitive load on the TMP103HYFFT's digital output pins?
  The maximum allowable capacitive load on the digital output pins is 400pF. Exceeding this limit may cause signal integrity issues or even device malfunction.