A good PCB layout is crucial for the TLWR7600. Ensure a solid ground plane, keep the input and output traces short and separate, and use a common mode choke to reduce EMI. Refer to Vishay's application notes for more details.
The input capacitor value depends on the input voltage, frequency, and desired ripple voltage. A general rule of thumb is to use a capacitor with a value between 1uF to 10uF, with a voltage rating higher than the input voltage. Consult Vishay's capacitor selection guide for more information.
The TLWR7600 can operate from -40°C to 125°C, but the maximum junction temperature (Tj) should not exceed 150°C. Ensure proper thermal management and heat sinking to prevent overheating.
To ensure EMC, use a shielded enclosure, keep the TLWR7600 away from sensitive components, and use EMI filters or common mode chokes on the input and output lines. Follow Vishay's EMC guidelines and relevant industry standards.
The recommended input voltage range for the TLWR7600 is 7V to 36V, but it can operate from 6V to 40V. However, the output voltage and efficiency may vary outside the recommended range.
