The recommended input capacitor value is 1uF to 10uF, depending on the input voltage and output current requirements. A larger capacitor value can help to reduce input voltage ripple and improve output voltage regulation.
To ensure stability, make sure to follow the recommended PCB layout guidelines, use a sufficient input capacitor, and add a 10nF to 100nF capacitor between the VOUT and VIN pins to filter out high-frequency noise. Additionally, avoid using long traces and minimize the distance between the input capacitor and the device.
The maximum output current capability of the TLV70130DBVT is 300mA. However, the actual output current capability may be limited by the input voltage, output voltage, and thermal considerations. Be sure to check the device's thermal performance and power dissipation to ensure reliable operation.
The TLV70130DBVT is rated for operation up to 125°C. However, the device's performance and reliability may degrade at high temperatures. Be sure to check the device's thermal performance and power dissipation to ensure reliable operation in high-temperature environments.
The output voltage of the TLV70130DBVT is determined by the resistor divider network connected to the FB pin. The output voltage can be calculated using the formula: VOUT = 0.6V x (1 + R1/R2), where R1 and R2 are the resistors in the divider network.
TLV70130DBVT datasheet
by Texas Instruments
