TLC59108FIPWR datasheet by Texas Instruments

TLC59108FIPWR Frequently Asked Questions (FAQs)

• What is the maximum current rating for each output channel?
  The TLC59108FIPWR has a maximum current rating of 30mA per output channel, with a total device current rating of 120mA.
• How do I ensure that the device is properly powered and configured?
  To ensure proper operation, connect VCC to a 3.3V or 5V power supply, and GND to ground. Also, make sure to configure the device using the I2C interface, following the protocol outlined in the datasheet.
• What is the purpose of the REXT resistor, and how do I choose the correct value?
  The REXT resistor sets the current limit for each output channel. Choose a value between 1kΩ and 10kΩ, depending on the desired current limit and output voltage. A smaller REXT value results in a higher current limit.
• How do I handle thermal considerations for the TLC59108FIPWR?
  To prevent overheating, ensure good airflow around the device, and consider using a heat sink if the device will be operating at high currents or in high-temperature environments.
• What is the purpose of the EN pin, and how do I use it?
  The EN (enable) pin is an active-low input that enables or disables the device. Tie EN to GND to enable the device, or to VCC to disable it. Use EN to turn the device on or off, or to implement a shutdown function.