TLC393IDRG4 datasheet by Texas Instruments

TLC393IDRG4 Frequently Asked Questions (FAQs)

• What is the maximum operating temperature range for TLC393IDRG4?
  The TLC393IDRG4 can operate from -40°C to 125°C, but the recommended operating temperature range is -40°C to 85°C for optimal performance.
• How do I ensure the TLC393IDRG4 is properly powered?
  The TLC393IDRG4 requires a single 3.3V or 5V power supply, and it's recommended to use a decoupling capacitor (e.g., 0.1uF) close to the VCC pin to filter out noise and ensure stable operation.
• What is the maximum current that can be sunk or sourced by the TLC393IDRG4?
  The TLC393IDRG4 can sink or source up to 20mA per channel, but it's recommended to limit the current to 10mA per channel for reliable operation.
• How do I configure the TLC393IDRG4 for open-drain or push-pull output mode?
  The TLC393IDRG4 has an internal pull-up resistor that can be enabled or disabled by connecting the PU pin to VCC or GND, respectively. For open-drain output mode, connect PU to GND, and for push-pull output mode, connect PU to VCC.
• What is the propagation delay of the TLC393IDRG4?
  The propagation delay of the TLC393IDRG4 is typically around 10ns to 20ns, depending on the input signal frequency and output load capacitance.