Texas Instruments recommends following a star-grounding scheme, keeping analog and digital grounds separate, and using a solid ground plane to minimize noise. Additionally, keep the input and output traces short and away from each other to reduce crosstalk.
It is recommended to power up the VCC pin first, followed by the input signals, and then the output loads. During power-down, reverse the sequence. Ensure that the input signals are stable and within the recommended voltage range before applying power to the VCC pin.
The TLC2272CPE4 can drive up to 1000 pF of capacitive load. However, as the capacitive load increases, the output slew rate will decrease, which may affect the overall system performance. It is recommended to use a buffer or a line driver if the capacitive load is expected to be high.
If the input signals exceed the recommended voltage range, the TLC2272CPE4 may not function correctly, and it may lead to latch-up or damage. Exceeding the absolute maximum ratings can cause permanent damage to the device, and it is essential to ensure that the input signals are within the recommended range to maintain the device's reliability and performance.
The recommended operating temperature range for the TLC2272CPE4 is -40°C to 125°C. As the temperature increases, the device's performance may degrade, and the output voltage swing may decrease. It is essential to ensure that the device operates within the recommended temperature range to maintain its performance and reliability.
TLC2272CPE4 datasheet
by Texas Instruments
