The recommended operating voltage range for the TL714CDR is 2.7V to 5.5V.
To ensure stability, it's recommended to use a capacitor with a value between 10nF to 100nF between the Vout pin and the GND pin, and to keep the output capacitor value below 10uF.
The maximum output current of the TL714CDR is 150mA.
The TL714CDR is rated for operation up to 125°C, but it's recommended to derate the output current at higher temperatures to ensure reliability.
The output capacitor value depends on the output voltage and the desired ripple voltage. A general rule of thumb is to use a capacitor value between 1uF to 10uF for most applications.
TL714CDR datasheet
by Texas Instruments
