Please enter a valid full or partial manufacturer part number with a minimum of 3 letters or numbers

    Part Img TL712CDR datasheet by Texas Instruments

    • DIFFERENTIAL COMPARATOR
    • Original
    • Yes
    • Yes
    • Active
    • EAR99
    • 8542.33.00.01
    • 8542.33.00.00
    • Powered by Findchips Logo Findchips
    • Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.

    TL712CDR datasheet preview

    TL712CDR Frequently Asked Questions (FAQs)

    • The recommended input capacitance for the TL712CDR is 10nF to 100nF. This value can be adjusted based on the specific application and noise requirements.
    • To ensure stability in the TL712CDR output, it is recommended to use a minimum output capacitance of 10uF and a maximum equivalent series resistance (ESR) of 1 ohm. Additionally, the output voltage should be decoupled with a 10nF to 100nF capacitor.
    • The TL712CDR can handle a maximum input voltage of 18V. Exceeding this voltage may damage the device.
    • The TL712CDR is rated for operation up to 125°C. However, the device's performance and reliability may degrade at high temperatures. It is recommended to derate the device's output current and voltage at high temperatures.
    • To reduce noise and ripple in the TL712CDR output, it is recommended to use a low-ESR output capacitor, add a noise-reducing capacitor (e.g., 10nF to 100nF) in parallel with the output capacitor, and ensure good PCB layout and grounding practices.
    Supplyframe Tracking Pixel