TL3414AID datasheet by Texas Instruments

TL3414AID Frequently Asked Questions (FAQs)

• What is the recommended operating voltage range for the TL3414AID?
  The recommended operating voltage range for the TL3414AID is 4.5V to 16V, although it can operate up to 18V with reduced performance.
• How do I ensure the TL3414AID is stable and oscillation-free?
  To ensure stability, use a 1-μF capacitor between the VCC and GND pins, and a 10-nF capacitor between the COMP and GND pins. Additionally, keep the layout compact and avoid long traces.
• What is the purpose of the EN (Enable) pin, and how do I use it?
  The EN pin is an active-low input that enables or disables the device. Connect EN to VCC to enable the device or to GND to disable it. Use a pull-up resistor to VCC if the EN pin is not driven.
• How do I adjust the output voltage of the TL3414AID?
  The output voltage can be adjusted by using a resistive divider network between the OUT pin and the ADJ pin. The ratio of the resistors determines the output voltage.
• What is the maximum output current of the TL3414AID?
  The maximum output current of the TL3414AID is 1.5A, but it can be limited by the input voltage, output voltage, and thermal considerations.