TL16CP754CPMR datasheet by Texas Instruments

TL16CP754CPMR Frequently Asked Questions (FAQs)

• What is the recommended operating voltage range for the TL16CP754CPMR?
  The recommended operating voltage range for the TL16CP754CPMR is 2.7V to 5.5V, although it can operate down to 2.3V with reduced performance.
• How do I ensure the TL16CP754CPMR is properly powered up and initialized?
  To ensure proper power-up and initialization, apply power to VCC before applying signals to the input pins, and allow the device to settle for at least 100 μs before using it.
• What is the maximum frequency of operation for the TL16CP754CPMR?
  The maximum frequency of operation for the TL16CP754CPMR is 50 MHz, although it can operate at higher frequencies with reduced performance and increased power consumption.
• How do I handle the output enable (OE) pin during power-up and power-down?
  During power-up, keep the OE pin high (disabled) until the device is fully powered up and initialized. During power-down, keep the OE pin low (enabled) to prevent bus contention.
• What is the recommended termination scheme for the TL16CP754CPMR?
  The recommended termination scheme for the TL16CP754CPMR is to use a 10-kΩ pull-up resistor on the output pins to VCC, and a 10-kΩ pull-down resistor on the input pins to GND.