The maximum power supply voltage for the TL082CD is ±18V, but it's recommended to operate within ±15V for optimal performance and to prevent damage to the device.
Yes, the TL082CD can be used as a single-supply op-amp, but it's essential to ensure that the input common-mode voltage is within the specified range (typically between VCC- and VCC+). Additionally, the output voltage swing may be reduced in single-supply operation.
The choice of resistor values for the feedback network depends on the specific application and desired gain. A good starting point is to use a ratio of Rf/Ri = 1:1 for a non-inverting amplifier or Rf/Ri = 2:1 for an inverting amplifier. Adjust the values based on the desired gain and bandwidth requirements.
The TL082CD can provide a maximum output current of ±20mA. However, it's essential to ensure that the output current does not exceed the maximum rating to prevent damage to the device.
The TL082CD is rated for operation up to 125°C (TJ). However, it's essential to ensure that the device is properly heat-sinked and that the operating conditions do not exceed the maximum ratings specified in the datasheet.
TL082CD datasheet
by STMicroelectronics
