TL074ID datasheet by Texas Instruments

TL074ID Frequently Asked Questions (FAQs)

• What is the maximum power supply voltage for the TL074ID?
  The maximum power supply voltage for the TL074ID is ±18V, or 36V total.
• Can I use the TL074ID in a single-supply application?
  Yes, the TL074ID can be used in single-supply applications, but the input common-mode voltage range is limited to VCC-2V to VCC+2V.
• What is the input impedance of the TL074ID?
  The input impedance of the TL074ID is typically around 2MΩ, but it can vary depending on the specific application and operating conditions.
• Can I use the TL074ID as a comparator?
  While the TL074ID can be used as a comparator, it's not the best choice due to its relatively slow slew rate and limited bandwidth. A dedicated comparator IC would be a better choice.
• How do I layout the PCB to minimize noise and interference with the TL074ID?
  To minimize noise and interference, keep the TL074ID away from high-current or high-frequency components, use a solid ground plane, and keep signal traces short and direct.