Texas Instruments provides a recommended PCB layout in the THS3061DGNRG4 evaluation module (EVM) user's guide, which includes guidelines for component placement, routing, and grounding to minimize noise and ensure optimal performance.
The selection of input and output termination resistors depends on the specific application and signal requirements. Texas Instruments provides guidelines for selecting termination resistors in the THS3061DGNRG4 datasheet and application notes. Additionally, the THS3061DGNRG4 EVM user's guide provides examples of termination resistor values for different applications.
The THS3061DGNRG4 is specified to operate over a temperature range of -40°C to 125°C. However, the device may be able to operate beyond this range with reduced performance and reliability. It is recommended to consult with Texas Instruments or a qualified engineer to determine the suitability of the device for a specific application.
To ensure EMC with THS3061DGNRG4, follow proper PCB layout and design practices, such as using a solid ground plane, minimizing signal trace lengths, and using shielding and filtering as necessary. Additionally, consult with Texas Instruments or a qualified engineer to determine the specific EMC requirements for your application.
Texas Instruments recommends using a combination of ceramic and electrolytic capacitors to decouple the power supply pins of THS3061DGNRG4. A 10uF ceramic capacitor and a 10uF electrolytic capacitor in parallel are recommended for each power supply pin. The capacitors should be placed as close as possible to the power supply pins and connected to a solid ground plane.
THS3061DGNRG4 datasheet
by Texas Instruments
