A good PCB layout is crucial for the TDA8552T/N1,518. Ensure that the input and output tracks are separated, and the decoupling capacitors are placed close to the IC. Use a solid ground plane and avoid vias under the IC. NXP provides a recommended PCB layout in the application note AN11535.
The choice of external components, such as resistors, capacitors, and inductors, depends on the specific application and requirements. NXP provides a component selection guide in the application note AN11535. Additionally, consider factors like component tolerance, temperature coefficient, and parasitic effects.
The maximum allowed voltage on the input pins is 6.5V, which is higher than the recommended operating voltage of 5V. However, it's essential to ensure that the input voltage does not exceed 6.5V to prevent damage to the IC.
Overvoltage protection can be implemented using a voltage supervisor IC, such as the NXP PCA9455, which can detect overvoltage conditions and reset the TDA8552T/N1,518. Alternatively, a simple voltage divider and zener diode circuit can be used to clamp the input voltage.
The thermal resistance of the TDA8552T/N1,518 package is typically around 30-40 K/W, depending on the specific package type and PCB design. This information is usually available in the package thermal characteristics section of the datasheet.
TDA8552T/N1,518 datasheet
by NXP Semiconductors
Findchips
