TDA75610S-48X datasheet by STMicroelectronics

TDA75610S-48X Frequently Asked Questions (FAQs)

• What is the maximum input voltage that the TDA75610S-48X can handle?
  The maximum input voltage is 40V, but it's recommended to keep it below 36V for reliable operation.
• How do I ensure the stability of the output voltage?
  To ensure stability, make sure to use a minimum output capacitance of 10uF, and a maximum ESR of 1 ohm. Also, use a low-ESR capacitor for the output filter.
• What is the maximum output current that the TDA75610S-48X can provide?
  The maximum output current is 1.5A, but it's recommended to keep it below 1.2A for reliable operation and to prevent overheating.
• How do I adjust the output voltage?
  The output voltage can be adjusted by using a resistor divider network between the output and the ADJ pin. The output voltage is determined by the ratio of the resistors and the internal reference voltage.
• What is the purpose of the EN pin?
  The EN (Enable) pin is used to turn the regulator on or off. When the EN pin is high, the regulator is enabled, and when it's low, the regulator is disabled.