The maximum power dissipation of the TDA7560 is 2.5W, but it can be increased to 4W with proper heat sinking.
To ensure the stability of the output voltage, it is recommended to use a minimum output capacitance of 10uF and a maximum ESR of 1 ohm.
The EN (Enable) pin is used to enable or disable the device. When the EN pin is high, the device is enabled, and when it is low, the device is disabled.
No, the TDA7560 is a buck converter, not a boost converter. It is designed to step down the input voltage to a lower output voltage.
The maximum input voltage of the TDA7560 is 18V, but it can be operated with input voltages as low as 6.5V.