The maximum power supply voltage that can be applied to the TDA7375AV is 18V. Exceeding this voltage may damage the device.
To ensure the stability of the output voltage, it is recommended to use a minimum output capacitance of 10uF and a maximum ESR of 1 ohm. Additionally, the input capacitor should be at least 10uF with an ESR of 0.1 ohm.
The maximum output current that the TDA7375AV can deliver is 3.5A. Exceeding this current may cause the device to overheat or malfunction.
To protect the TDA7375AV from overheating, ensure that the device is mounted on a suitable heat sink, and the ambient temperature is within the recommended operating range of -40°C to 150°C.
The EN (enable) pin is used to enable or disable the output voltage of the TDA7375AV. When the EN pin is high, the output voltage is enabled, and when it is low, the output voltage is disabled.