The maximum power supply voltage for the TDA7296S is 40V. Exceeding this voltage can damage the IC.
To prevent overheating, ensure good heat sinking, use a heat sink with a thermal resistance of less than 10°C/W, and keep the ambient temperature below 40°C.
The minimum load impedance for the TDA7296S is 2 ohms. Using a load impedance lower than this can cause instability and oscillation.
Yes, the TDA7296S can be used as a bridge amplifier. However, this requires additional external components and careful PCB design to ensure proper operation.
To reduce noise and hum, use a well-regulated power supply, add decoupling capacitors, and ensure good grounding and shielding of the PCB.
