TAS5760MDAPR datasheet by Texas Instruments

TAS5760MDAPR Frequently Asked Questions (FAQs)

• What is the recommended power-up sequence for the TAS5760MDAPR?
  The recommended power-up sequence is to apply PVDD first, followed by AVDD, and then DVDD. This ensures that the internal voltage regulators are powered up in the correct order.
• How do I configure the TAS5760MDAPR for mono or stereo operation?
  The TAS5760MDAPR can be configured for mono or stereo operation by setting the MONO/STEREO pin high or low, respectively. In mono mode, the left and right channels are summed and output on both channels.
• What is the maximum power handling of the TAS5760MDAPR?
  The TAS5760MDAPR can handle up to 20W of power per channel into a 4Ω load, or up to 10W per channel into an 8Ω load.
• How do I adjust the gain of the TAS5760MDAPR?
  The gain of the TAS5760MDAPR can be adjusted by setting the GAIN pin to one of four possible gain settings: 20dB, 26dB, 32dB, or 38dB.
• What is the purpose of the MUTE pin on the TAS5760MDAPR?
  The MUTE pin is used to mute the output of the TAS5760MDAPR. When the MUTE pin is high, the output is muted, and when it is low, the output is enabled.