The recommended operating temperature range for the T602-012.8M is -40°C to +85°C, as specified in the datasheet. However, it's essential to note that the device can operate up to +125°C for short-term exposure, but this may affect its long-term reliability.
To ensure reliable startup, make sure to follow the recommended power-up sequence, provide a stable power supply, and meet the specified voltage and current requirements. Additionally, consider adding a decoupling capacitor (e.g., 10nF) between the VDD and GND pins to filter out noise and improve startup reliability.
The typical power consumption of the T602-012.8M is around 20mA, but this can vary depending on the specific application, operating frequency, and output load. It's essential to check the datasheet for the exact power consumption specifications and to ensure your design can accommodate the required power.
While the T602-012.8M is designed to be robust, it's still important to consider the vibration sensitivity of the device. Connor-Winfield recommends following the standard vibration testing procedures (e.g., IEC 60068-2-6) to ensure the oscillator can withstand the expected vibration levels in your specific application.
The T602-012.8M has a fixed output frequency of 12.8MHz, which is set by the internal crystal resonator. There is no provision for adjusting the output frequency. If you need a different frequency, you may need to consider a different oscillator or a frequency synthesizer.
Findchips
Findchips