The maximum operating temperature range for the STR912FAZ42H6 is -40°C to +85°C, as specified in the datasheet. However, it's recommended to operate within -20°C to +70°C for optimal performance and reliability.
The clock settings for the STR912FAZ42H6 can be configured using the Clock Control Register (CKCU). You need to set the clock source, divider, and multiplier according to your application requirements. Refer to the datasheet and the STMicroelectronics application notes for detailed instructions.
The maximum current consumption of the STR912FAZ42H6 depends on the operating frequency, voltage, and peripherals used. According to the datasheet, the typical current consumption is around 20mA at 32MHz and 3.3V. However, this value can increase up to 50mA or more depending on the specific application and usage.
The STR912FAZ42H6 has several low-power modes, including Sleep, Stop, and Standby. To implement these modes, you need to configure the Power Management Controller (PMC) and use the corresponding instructions in your firmware. Refer to the datasheet and the STMicroelectronics application notes for detailed information on how to use these modes effectively.
The STR912FAZ42H6's ADC has a 12-bit resolution and a maximum sampling rate of 1Msps. However, the ADC's accuracy and linearity may be affected by factors such as temperature, voltage, and noise. Additionally, the ADC's input impedance and input range should be considered when designing the analog circuitry.
STR912FAZ42H6 datasheet
by STMicroelectronics
Findchips
