A 2-layer or 4-layer PCB with a thermal relief pattern and a solid ground plane is recommended. The device should be placed near a thermal pad or a heat sink to dissipate heat efficiently.
Ensure proper heat sinking, use a thermal interface material, and follow the recommended PCB layout guidelines. Also, consider derating the device's power handling capability at high temperatures.
The maximum allowed voltage on the gate driver output is 20V, which is the absolute maximum rating. However, it's recommended to keep the voltage below 15V to ensure reliable operation.
Yes, the STPS20200CFP can be used in a half-bridge configuration. However, ensure that the device is properly biased and the gate driver output is not short-circuited to the power supply or ground.
Use a voltage regulator or a voltage limiter to prevent overvoltage. For overcurrent protection, use a current sense resistor and a comparator or a dedicated overcurrent protection IC.
STPS20200CFP datasheet
by STMicroelectronics
