The maximum operating frequency of the STMUX1000LQTR is 100 MHz, but it can be limited by the capacitance of the load and the signal integrity of the PCB.
To ensure signal integrity, use a low-impedance PCB design, keep the signal traces short, and use a common ground plane. Also, consider using a termination resistor at the far end of the signal trace.
Yes, the STMUX1000LQTR can be used as a level shifter, but it's not recommended as it's not designed for level shifting. Instead, use a dedicated level shifter IC for this purpose.
The power consumption of the STMUX1000LQTR depends on the operating frequency, input voltage, and output load. Typically, it consumes around 10-20 mA at 100 MHz with a 3.3V supply voltage.
No, the STMUX1000LQTR is not designed to operate with a 5V supply voltage. The recommended supply voltage range is 2.3V to 3.6V.
STMUX1000LQTR datasheet
by STMicroelectronics
