The recommended operating voltage range for the STM6315RGW13F is 2.97V to 3.63V.
The clock source for the STM6315RGW13F can be configured using the CLK_SRC[1:0] pins. The clock source can be set to either the internal oscillator, an external clock, or the HSE crystal oscillator.
The maximum frequency of the STM6315RGW13F is 72 MHz.
The STM6315RGW13F has several low-power modes, including Sleep, Stop, and Standby modes. These modes can be entered by setting the appropriate bits in the Power Control Register (PWR_CR).
The BOOT0 and BOOT1 pins are used to select the boot mode of the device. They can be used to select between booting from the internal flash, an external memory, or a serial interface.
STM6315RGW13F datasheet
by STMicroelectronics
