STD60NF3LLT4 datasheet by STMicroelectronics

STD60NF3LLT4 Frequently Asked Questions (FAQs)

• What is the maximum operating frequency for the STD60NF3LLT4?
  The maximum operating frequency for the STD60NF3LLT4 is 100 kHz, but it can be operated at higher frequencies with reduced performance.
• How do I ensure the STD60NF3LLT4 is properly biased for optimal performance?
  To ensure proper biasing, the gate-source voltage (Vgs) should be between 2V and 4V, and the drain-source voltage (Vds) should be between 10V and 60V. Additionally, the gate current (Ig) should be limited to 100 mA.
• What is the maximum power dissipation for the STD60NF3LLT4?
  The maximum power dissipation for the STD60NF3LLT4 is 150 W, but this can be increased with proper heat sinking and thermal management.
• How do I protect the STD60NF3LLT4 from overvoltage and overcurrent?
  To protect the STD60NF3LLT4 from overvoltage and overcurrent, use a voltage regulator to limit the voltage to 60V or less, and add current-limiting resistors or fuses to prevent excessive current.
• What is the typical turn-on and turn-off time for the STD60NF3LLT4?
  The typical turn-on time for the STD60NF3LLT4 is 10 ns, and the typical turn-off time is 20 ns. However, these times can vary depending on the specific application and operating conditions.