Please enter a valid full or partial manufacturer part number with a minimum of 3 letters or numbers

    Part Img STA50613TR datasheet by STMicroelectronics

    • 40V 4A QUAD POWER HALF BRIDGE
    • Original
    • Yes
    • Unknown
    • Obsolete
    • EAR99
    • 8542.39.00.01
    • 8542.39.00.00
    • Find it at Findchips.com
    • Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.

    STA50613TR datasheet preview

    STA50613TR Frequently Asked Questions (FAQs)

    • STMicroelectronics provides a recommended PCB layout in the application note AN5323, which includes guidelines for component placement, routing, and thermal management to ensure optimal performance and minimize electromagnetic interference (EMI).
    • The STA50613TR supports multiple audio formats, including I2S, TDM, and SPDIF. Configuration is done through the I2C interface using specific register settings. Refer to the device's programming guide (UM2312) for detailed instructions on configuring the device for different audio formats.
    • The maximum power consumption of the STA50613TR depends on the operating mode and clock frequency. According to the datasheet, the maximum power consumption is 420 mW in the active mode with a 24.576 MHz clock frequency. However, this value can be reduced by using power-saving modes and optimizing the clock frequency.
    • To troubleshoot audio issues, start by verifying the device's configuration and register settings. Check the clock frequency, audio format, and data transmission mode. Use an oscilloscope to verify the audio signal quality and check for any signs of distortion or noise. Refer to the device's troubleshooting guide (UM2313) for more detailed instructions and common error scenarios.
    • Yes, the STA50613TR is AEC-Q100 qualified, making it suitable for automotive applications. However, it's essential to ensure that the device is used within the specified operating temperature range (-40°C to 105°C) and that the PCB design meets the necessary electromagnetic compatibility (EMC) and electromagnetic interference (EMI) requirements for automotive applications.
    Price & Stock Powered by Findchips Logo
    Supplyframe Tracking Pixel