The maximum operating temperature range for the ST72F63BH6T1 is -40°C to +85°C, as specified in the datasheet. However, it's recommended to operate the device within the recommended temperature range of 0°C to +70°C for optimal performance and reliability.
The ST72F63BH6T1 has multiple clock sources, including an internal RC oscillator, an external crystal oscillator, and an external clock source. To configure the clock source, you need to set the appropriate bits in the Clock Control Register (CCR) and the Clock Security System Register (CSSR). Refer to the datasheet and the application notes for more information.
The maximum current consumption of the ST72F63BH6T1 depends on the operating frequency, voltage, and peripherals used. According to the datasheet, the typical current consumption is around 10mA at 16MHz and 3.3V. However, this value can increase up to 30mA or more depending on the specific application and usage.
The ST72F63BH6T1 has a built-in watchdog timer that can be enabled and configured using the Watchdog Timer Control Register (WTCR). You need to set the watchdog timer period, enable the watchdog timer, and implement a software reset mechanism to reset the device in case of a watchdog timer overflow. Refer to the datasheet and application notes for more information.
Yes, the ST72F63BH6T1 has an external memory interface that allows you to connect external memory devices, such as SRAM or Flash memory. You need to configure the external memory interface using the External Memory Control Register (EMCR) and ensure that the memory device is compatible with the microcontroller's bus timing and voltage requirements.
ST72F63BH6T1 datasheet
by STMicroelectronics
Findchips
