The ST10F280-Q3TR can operate from -40°C to 125°C, but the maximum junction temperature is 150°C.
The clock settings can be configured using the Clock Control Register (CKCU) and the PLL Clock Register (PLLCK). Refer to the datasheet for specific register settings and configuration options.
The maximum frequency for the ST10F280-Q3TR is 128 MHz, but it can be overclocked to 144 MHz with reduced voltage and temperature ranges.
The ADC on the ST10F280-Q3TR is a 12-bit successive approximation ADC. To use it, configure the ADC clock, select the channel, and start the conversion using the ADC Control Register (ADC_CR). Refer to the datasheet for specific register settings and conversion sequences.
Yes, the ST10F280-Q3TR can be used with an external oscillator. The external oscillator can be connected to the XTAL1 and XTAL2 pins, and the clock source can be selected using the Clock Control Register (CKCU).
ST10F280-Q3TR datasheet
by STMicroelectronics
Findchips
