The recommended operating voltage range for SS16M is 2.7V to 5.5V, although it can tolerate a voltage range of 2.3V to 6.0V for short periods.
The SS16M has a built-in POR circuit that resets the device when the power supply voltage rises above 2.3V. No external POR circuit is required, but a 0.1uF capacitor between VCC and GND is recommended to filter out noise.
The maximum clock frequency supported by SS16M is 20MHz, although it can operate at higher frequencies with reduced voltage and temperature ranges.
The SS16M has a built-in watchdog timer that can be enabled by setting the WDTEN bit in the configuration register. The watchdog timer can be set to timeout periods ranging from 16ms to 2048ms.
Yes, the SS16M is designed for low-power applications and has a typical standby current of 10uA and a typical active current of 1mA at 1MHz.
