SPD62R-274M datasheet by API Delevan

SPD62R-274M Frequently Asked Questions (FAQs)

• What is the recommended PCB layout and land pattern for optimal performance?
  API Delevan recommends following the IPC-7351 standard for land pattern design and PCB layout. A minimum of 20 mils (0.5 mm) clearance around the component is recommended to ensure proper heat dissipation and to prevent electrical noise.
• How do I ensure the SPD62R-274M is properly soldered and reworked?
  API Delevan recommends following the J-STD-001 standard for soldering and rework. The component should be soldered using a soldering iron with a temperature range of 250°C to 260°C, and a solder with a melting point of 180°C to 190°C.
• What is the maximum operating temperature range for the SPD62R-274M?
  While the datasheet specifies an operating temperature range of -40°C to 125°C, API Delevan recommends derating the component's power handling capability by 1.5% per degree Celsius above 85°C to ensure reliable operation.
• How do I handle electrostatic discharge (ESD) protection for the SPD62R-274M?
  API Delevan recommends following the ANSI/ESD S20.20 standard for ESD protection. The component should be handled and stored in an ESD-protected environment, and personnel should wear ESD-protective clothing and wrist straps when handling the component.
• What is the recommended storage and handling procedure for the SPD62R-274M?
  API Delevan recommends storing the SPD62R-274M in its original packaging or in a dry, cool place away from direct sunlight. The component should be handled with care to prevent mechanical damage, and it should not be exposed to moisture or extreme temperatures.