The recommended operating temperature range for the SNJ54AS867JT is -40°C to 125°C, as specified in the datasheet. However, it's essential to note that the device's performance and reliability may degrade if operated outside this range.
The SNJ54AS867JT has an internal POR circuit that ensures the device resets properly during power-up. To handle POR, ensure that the power supply voltage (VCC) rises monotonically and reaches the minimum specified voltage (typically 1.8V) before the device starts operating. Additionally, add a capacitor (typically 0.1uF) between VCC and GND to filter out noise and ensure a clean power-up sequence.
The SNJ54AS867JT can operate up to a maximum clock frequency of 100 MHz. However, the actual clock frequency supported may depend on the specific application, operating conditions, and PCB layout. It's recommended to consult the datasheet and perform thorough testing to ensure the device operates within the specified frequency range.
To implement a reliable reset circuit, use a dedicated reset pin (e.g., RESET) and connect it to a pull-up resistor (typically 1kΩ) and a capacitor (typically 0.1uF) to VCC. This ensures a clean reset signal and prevents unwanted resets due to noise or power glitches.
When designing the PCB layout and routing for the SNJ54AS867JT, ensure that the device's power and ground pins are connected to a solid power plane and a low-impedance ground plane, respectively. Keep signal traces short and away from noise sources, and use a 4-layer PCB stackup to minimize electromagnetic interference (EMI). Additionally, follow the recommended pinout and layout guidelines provided in the datasheet.
SNJ54AS867JT datasheet
by Texas Instruments
Findchips
Findchips