SN75176ADRE4 datasheet by Texas Instruments

SN75176ADRE4 Frequently Asked Questions (FAQs)

• What is the maximum cable length that can be used with the SN75176ADRE4?
  The maximum cable length depends on the specific application and the type of cable used. However, as a general rule, the SN75176ADRE4 can support cable lengths up to 100 meters (328 feet) at a data rate of 100 Mbps.
• Can the SN75176ADRE4 be used in a point-to-point or multi-point configuration?
  The SN75176ADRE4 is designed for point-to-point configurations, but it can also be used in multi-point configurations with the use of repeaters or hubs.
• What is the power consumption of the SN75176ADRE4?
  The power consumption of the SN75176ADRE4 is typically around 150 mA at 5V, but this can vary depending on the specific application and operating conditions.
• Is the SN75176ADRE4 compatible with other RS-485 transceivers?
  The SN75176ADRE4 is compatible with other RS-485 transceivers that comply with the EIA/TIA-485 standard, but compatibility should be verified on a case-by-case basis.
• Can the SN75176ADRE4 be used in a half-duplex or full-duplex configuration?
  The SN75176ADRE4 can be used in either half-duplex or full-duplex configurations, depending on the specific application requirements.