The SN75117P can support data rates up to 10 Mbps, making it suitable for high-speed applications such as industrial control systems and medical devices.
The SN75117P has a high common-mode rejection ratio (CMRR) of 80 dB, which helps to reject common-mode noise and EMI. Additionally, it has a built-in electromagnetic interference (EMI) filter to further reduce the effects of EMI.
The maximum cable length that can be used with the SN75117P depends on the data rate and the type of cable used. As a general rule, the maximum cable length is approximately 100 meters at 10 Mbps, but this can be extended to several hundred meters at lower data rates.
Yes, the SN75117P can be used in half-duplex mode by connecting the transmitter output to the receiver input through a directional coupler or a switch. This allows the device to transmit and receive data on the same wire, but not simultaneously.
The power consumption of the SN75117P depends on the operating mode and the supply voltage. Typically, the device consumes around 20-30 mA of current from a 5V supply voltage, making it suitable for battery-powered applications.
SN75117P datasheet
by Texas Instruments
