SN74LVC16244AGRDR datasheet by Texas Instruments

SN74LVC16244AGRDR Frequently Asked Questions (FAQs)

• What is the recommended operating voltage range for the SN74LVC16244AGRDR?
  The recommended operating voltage range for the SN74LVC16244AGRDR is 1.65 V to 3.6 V.
• How do I handle the power sequencing for the SN74LVC16244AGRDR?
  It is recommended to power up the VCC pin before the input signals, and power down the VCC pin after the input signals. This ensures that the device is properly initialized and avoids any potential latch-up conditions.
• What is the maximum frequency of operation for the SN74LVC16244AGRDR?
  The maximum frequency of operation for the SN74LVC16244AGRDR is 100 MHz.
• How do I ensure signal integrity when using the SN74LVC16244AGRDR?
  To ensure signal integrity, it is recommended to use a low-impedance PCB design, minimize trace lengths, and use termination resistors as needed. Additionally, the device should be placed close to the signal source and the load should be impedance-matched to the output driver.
• Can I use the SN74LVC16244AGRDR in a 5V system?
  While the SN74LVC16244AGRDR is specified for operation up to 3.6V, it can tolerate 5V input signals. However, the output voltage will be limited to the VCC voltage, which should not exceed 3.6V. It is recommended to use a level translator or voltage regulator if the system requires 5V operation.