SN74LV74AMPWREP datasheet by Texas Instruments

SN74LV74AMPWREP Frequently Asked Questions (FAQs)

• What is the recommended operating voltage range for the SN74LV74AMPWREP?
  The recommended operating voltage range for the SN74LV74AMPWREP is 2.3V to 3.6V, although it can operate as low as 1.65V with reduced performance.
• How do I handle the power-up and power-down sequencing for the SN74LV74AMPWREP?
  It is recommended to power up the VCC pin before the input signals, and power down the VCC pin after the input signals. This ensures that the device is properly initialized and avoids any potential latch-up or damage.
• What is the maximum clock frequency that the SN74LV74AMPWREP can handle?
  The maximum clock frequency that the SN74LV74AMPWREP can handle is 100 MHz, although this may vary depending on the specific application and operating conditions.
• How do I ensure that the SN74LV74AMPWREP is properly terminated to prevent signal reflections?
  It is recommended to use a series terminator (e.g. 22-33 ohms) at the far end of the transmission line to prevent signal reflections. Additionally, the use of a parallel terminator (e.g. 50-100 ohms) at the near end of the transmission line can also help to reduce signal reflections.
• What is the maximum output current that the SN74LV74AMPWREP can sink or source?
  The maximum output current that the SN74LV74AMPWREP can sink or source is 24 mA, although this may vary depending on the specific application and operating conditions.