SN74LV273ADW datasheet by Texas Instruments

SN74LV273ADW Frequently Asked Questions (FAQs)

• What is the maximum clock frequency that the SN74LV273ADW can handle?
  The maximum clock frequency of the SN74LV273ADW is 100 MHz.
• How do I ensure that the SN74LV273ADW is properly powered?
  The SN74LV273ADW requires a single 3.3V power supply, and it's recommended to use a decoupling capacitor of 0.1 μF to 1 μF between VCC and GND to ensure proper power supply decoupling.
• What is the maximum current that the SN74LV273ADW can sink or source?
  The SN74LV273ADW can sink or source up to 24 mA of current per output.
• How do I handle the asynchronous reset input (CLR) of the SN74LV273ADW?
  The CLR input should be tied to VCC through a pull-up resistor (e.g., 1 kΩ) to ensure that the device is not inadvertently reset. A capacitor (e.g., 100 nF) can also be added in parallel to the pull-up resistor to filter out noise.
• What is the propagation delay of the SN74LV273ADW?
  The propagation delay of the SN74LV273ADW is typically around 10 ns, but it can vary depending on the operating conditions and load capacitance.