SN74LV273ADBRE4 datasheet by Texas Instruments

SN74LV273ADBRE4 Frequently Asked Questions (FAQs)

• What is the recommended operating voltage range for the SN74LV273ADBRE4?
  The recommended operating voltage range for the SN74LV273ADBRE4 is 2.7V to 3.6V, with a typical voltage of 3.3V.
• How do I handle the power-up and power-down sequencing for the SN74LV273ADBRE4?
  It is recommended to power up the VCC pin before the input signals, and power down the VCC pin after the input signals. This ensures that the device is properly initialized and avoids any potential latch-up or damage.
• What is the maximum clock frequency that the SN74LV273ADBRE4 can handle?
  The maximum clock frequency that the SN74LV273ADBRE4 can handle is 100 MHz, but this can vary depending on the specific application and operating conditions.
• How do I ensure that the SN74LV273ADBRE4 is properly terminated?
  The SN74LV273ADBRE4 requires proper termination to ensure signal integrity. This can be achieved by using a 50-ohm termination resistor at the output of each line, and by ensuring that the transmission lines are properly matched and terminated.
• What is the maximum output current that the SN74LV273ADBRE4 can sink or source?
  The maximum output current that the SN74LV273ADBRE4 can sink or source is 24 mA, but this can vary depending on the specific application and operating conditions.