SN74LV273ADBR datasheet by Texas Instruments

SN74LV273ADBR Frequently Asked Questions (FAQs)

• What is the maximum clock frequency that the SN74LV273ADBR can handle?
  The maximum clock frequency of the SN74LV273ADBR is 100 MHz.
• How do I ensure that the SN74LV273ADBR is properly powered?
  The SN74LV273ADBR requires a power supply voltage (VCC) of 2.7V to 3.6V, and it is recommended to use a decoupling capacitor of 0.1uF to 1uF between VCC and GND to ensure proper power supply decoupling.
• What is the propagation delay of the SN74LV273ADBR?
  The propagation delay of the SN74LV273ADBR is typically 10ns, but it can vary depending on the operating conditions and the specific application.
• Can I use the SN74LV273ADBR in a 5V system?
  No, the SN74LV273ADBR is not compatible with 5V systems. It is designed to operate at a maximum voltage of 3.6V, and exceeding this voltage can cause damage to the device.
• How do I handle the output enable (OE) pin of the SN74LV273ADBR?
  The output enable (OE) pin of the SN74LV273ADBR is active-low, meaning that the outputs are enabled when OE is low (GND) and disabled when OE is high (VCC).