Please enter a valid full or partial manufacturer part number with a minimum of 3 letters or numbers

    Part Img SN74LS85D datasheet by Texas Instruments

    • 4-BIT MAGNITUDE COMPARATORS
    • Original
    • No
    • Unknown
    • Obsolete
    • EAR99
    • 8542.39.00.01
    • 8542.39.00.00
    • Powered by Findchips Logo Findchips

    SN74LS85D datasheet preview

    SN74LS85D Frequently Asked Questions (FAQs)

    • The maximum clock frequency of the SN74LS85D is 10 MHz, but it can vary depending on the specific application and operating conditions.
    • To ensure proper power and decoupling, use a 5V power supply, add a 0.1uF decoupling capacitor between VCC and GND, and use a 10uF capacitor between VCC and GND for additional filtering.
    • The maximum input voltage that the SN74LS85D can tolerate is 5.5V, exceeding which can cause damage to the device.
    • The CLR input should be tied to VCC through a 1kΩ resistor and a 0.01uF capacitor to ensure proper reset operation.
    • The propagation delay of the SN74LS85D is typically around 10-15 ns, but it can vary depending on the specific application and operating conditions.
    Supplyframe Tracking Pixel