SN74LS151D datasheet by Texas Instruments

SN74LS151D Frequently Asked Questions (FAQs)

• What is the maximum clock frequency that the SN74LS151D can handle?
  The SN74LS151D can handle clock frequencies up to 25 MHz.
• How do I ensure that the SN74LS151D is properly powered?
  The SN74LS151D requires a single 5V power supply, and it's recommended to use a decoupling capacitor of 0.1uF to 1uF between VCC and GND to reduce noise and ensure stable operation.
• What is the propagation delay of the SN74LS151D?
  The propagation delay of the SN74LS151D is typically around 10-15 ns, but this can vary depending on the specific application and operating conditions.
• Can I use the SN74LS151D in a 3.3V system?
  No, the SN74LS151D is designed to operate at 5V, and using it in a 3.3V system may not provide reliable operation and may even damage the device.
• How do I handle the enable inputs (EN1 and EN2) of the SN74LS151D?
  The enable inputs (EN1 and EN2) are active-low, meaning that they must be pulled low to enable the device. If not used, they should be tied high to prevent unwanted operation.